Lights-Out for Windows 7, 8 and Windows Server
|
Steps to verify the correct network card settings. This is necessary to enable wake-up.
Open network adapters in device manager and select the network interface properties.
Note: These are the standard dialogs. Intel drivers use different dialogs. Please read Network interface settings (Intel).
Select the power management tab and tick all 3 check boxes as shown:
Some adapters have additional settings to wake-up from shutdown, these should be enabled:
Copyright (c) Martin Rothschink, AxoNet Software GmbH 2008-2015
|
What do you think about this topic? Send feedback!
|